Standard Glove Change on All PVC Garments. Read More

TEG

The AcidMaster®, ChemMaster® and WorkMaster® configurations have been designed from input by the end user to accommodate their specific needs. If you do not see the exact design required to fit your application Standard Safety will help you custom design a garment for your specific application. Once considered a custom design and now a standard, we had many requests to combine in one suit a SCBA and an egress bottle pouch to allow dual purpose use. It is now part of our standard offering. TEG designs are manufactured to order. Video demonstrations on the installation and removal of the SealTite® Sleeve Insert and Gloves are available in the SUPPORT link on our website.

Existing Designs

Choices include only the options in use on an existing design. Scroll down to see all available options.

Filter By:

Click on box in left column and then on the Compare Products at bottom of chart to view side-by-side comparison of selected products. Limit of 3 at one time.

Description
076-7032-****
CPE Front entry TEG Attached CPE stocking foot booties Choice of offered gloves Option to add offered boots INCLUDES 40 mil cover window SCBA pouch on the back Egress bottle pouch on the right...
View
076-7118-****
CPE Front entry TEG Attached CPE stocking foot booties Choice of offered gloves Option to add offered boots INCLUDES AC Unit with a 1/2" Hansen adaptor SCBA pouch on the back Egress bottle pou...
View
076-7050-****
This suit is an illustration of our customization capabilities.  It has a rear entry and CPE stocking foot booties.  Special attributes included in this design are: Pouch for an egress b...
View
Description

Any asterisk (*) shown in an Item No. will be replaced with a combination of digits identifying all of the options selected.

Available Options

Select attribute from list to see available options. Select option photo to enlarge.
SS - Sold SeparatelyAO - Option available at time of order

Type-TEG

TEG

If you do not see the exact design required to fit your application Standard Safety will help you custom design a TEG for your specific application. Once considered a custom design and now a standard, we had many requests to combine in one suit a SCBA and a 15-minute egress bottle pouch to allow dual purpose use. It is now part of our standard offering.

Entry-TEG

Front Entry

A pressure-sealing zipper with a flap covering the zipper extending from the shoulder crossing the body to the opposite side knee area for ease of donning and doffing.

Rear Entry

A pressure-sealing zipper extending from the crown nearly to the crotch area for ease of donning and doffing.

Gloves for CPE Fabric AO

Black Butyl

Per the glove manufacturer, this glove has a fabric lining, chemical resistance for very corrosive acids, ketones, esters and amine derivatives with unrivaled flexibility and dexterity.

Black Neoprene

Per the glove manufacturer: “Broad chemical resistance (acids, aliphatic solvents, solvent mixtures), increased by the thickness of the material. Good grip, due to embossed texture. Easy to pull on and off, due to chlorinated interior. The two neoprene layers superimposed increase the mechanical and chemical resistance. The glove red inner lay ensures that any wear is clearly visible"

Heavy Duty Black Neoprene

According to the glove manufacturer – this glove has “superior chemical resistance against acids and alkalis, such as concentrated hydrofluoric acid, oils, and greases” It also offers some insulation from hot liquids due to the cotton lining.

View Gloves & Sleeves category for specialty glove availability

In addition to the gloves we sell with the garment, we offer specialty gloves available in case quantities.

Gloves for PVC Fabrics AO

Blue Kevlar®-Lined Triple-Dipped PVC

Triple-dipped PVC-coated glove with a textured layer covering the hand portion of the glove to about the wrist and having a liner made with Kevlar® to provide cut resistance as well as chemical protection. This glove has ANSI Level 3 cut protection.

Heavy Duty Black Neoprene

According to the glove manufacturer – this glove has “superior chemical resistance against acids and alkalis, such as concentrated hydrofluoric acid, oils, and greases” It also offers some insulation from hot liquids due to the cotton lining.

View Gloves & Sleeves category for specialty glove availability

In addition to the gloves we sell with the garment, we offer specialty gloves available in case quantities.

Attached Footwear-TEG

Attached Composite-safety-toe Boots

PVC boot with a Composite safety-toe that meets ASTM F2413 M/I/75/C/75 EH*. This boot is 100% waterproof, does not transfer cold or set off metal detectors. The outsole provides slip resistance as well as has a chemical resistance to fats, oils, certain acids, alkalies, petroleum hydrocarbons, and other chemicals.

Attached Hazmax® Over-the-shoe Boots

Over-the-shoe Hazmax® boot fits over most shoes and boots and provides excellent chemical resistance. It has a seamless one-piece injection mold construction from a high viscosity flexible PVC that has been permanently attached/sealed to the end of the leg. This seal is liquid and vapor tight.

Attached Hazmax® Steel-toe Boots

Green Hazmax® boot with a steel toe that complies with ASTM F2413-05 and CSA Z195 and a steel shank and midsole. that has been permanently attached/sealed to the end of the leg. The one-piece PVC boot construction makes this a suitable boot for use in environments involving chemicals. The seal is liquid and vapor tight.

Attached Molded Black PVC Boots

Molded PVC Boots are made of chemically resistant molded PVC with 3/16" thick soles for protection from corrosive chemicals that have been permanently attached/sealed to the end of the leg. These boots are designed to fit over shoes or light work boots. The seal is liquid and vapor tight.

Attached PVC Stocking Foot Booties

PVC Stocking Foot Booties are molded and permanently attached to the leg cuff. This bootie is seamless, comfortable and shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

Attached CPE Stocking Foot Booties

CPE Stocking Foot Booties are permanently attached to the leg cuff. This bootie is shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

Boots Available with Stocking Foot Booties-TEG AO

PVC Composite-safety-toe Boots

15" PVC boot with a Composite safety-toe that meets ASTM F2413 M/I/75/C/75 EH*. This boot is 100% waterproof, does not transfer cold or set off metal detectors. The outsole provides slip resistance as well as has a chemical resistance to fats, oils, certain acids, alkalies, petroleum hydrocarbons, and other chemicals. *Boot offers some electrical hazard protection. Contact Customer Service for specific electrical hazard protection information.

Cover Window-TEG

40 mil thick field replaceable cover window to protect the sealed window from scratches, nicks and/or other minor damage. Flaps are added around the TEG window. The bottom flap has drain holes in the bottom and an extra splash flap. The cover window fits inside the window frame flaps surrounding the sealed window.

Cover Window Replacement-TEG SS

807-8006-0050 - 40 mil Cover Window

40 mil thick field replaceable cover window to protect the sealed window from scratches, nicks and/or other minor damage. Flaps are added around the TEG window. The bottom flap has drain holes in the bottom and an extra splash flap. The cover window fits inside the window frame flaps surrounding the sealed window.

AC-Vent-TEG

AC Unit

Adding an air-conditioning unit helps to keep the environment inside the garment comfortable. We offer a variety of AC units in cool only or cool/warm. Contact our Customer Service to determine which units are available with this suit.

Vent

A vent is added to improve the comfort level of interior suit environment while in use.

AC Unit & Vent

Adding an air-conditioning unit and a vent system helps to keep the environment inside the garment comfortable and air circulating. We offer a variety of AC units in cool only or cool/warm. Contact our Customer Service to determine which units are available with this suit.

Fitting for Vent AO

Brass Snap-Tite® Fitting

The fitting provided with the garment for connecting to the air source

Hansen Fitting

The fitting provided with the garment for connecting to the air source

Schrader Fitting

The fitting provided with the garment for connecting to the air source

Snap-Tite® Fitting

The fitting provided with the garment for connecting to the air source

Tru-Flate® Fitting

The fitting provided with the garment for connecting to the air source

Pass-through Available SS

NIOSH approved garment pass-through can be added for an additional fee. FACTORY INSTALLATION ONLY

Customer-supplied Pass-through Installation Available SS

We will install customer-supplied pass-through device other than Scott for an additional fee.

Reinforced Crotch-TEG

An extra triangular patch of garment fabric is sewn and sealed in the crotch region for added strength.

Reinforced Elbows-TEG

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Reinforced Knees-TEG

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Reinforced Seat-TEG

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

D-Ring Reinforcement-TEG

A reinforcement added to a garment to support the addition of a rescue D-ring assembly (sold separately)

Pouch-TEG

Egress Pouch

An added pouch-like section on the side waist/hip region to accommodate a 15-minute egress bottle.

SCBA Pouch

An added pouch-like section on the back of the garment to accommodate a SCBA.

Double Pouch

Slightly different pouches will accommodate either a SCBA or a 15-minute egress bottle. To be more versatile some garments have both style pouches referred to as a double pouch.

No Pouch

No accommodations for a SCBA or SKA Pak have been included in the design. The wearer will need to be connected to an external air source.

Requires External Air Source-TEG

No accomodations for a SCBA or SKA Pak have been included in this design. The wearer will need to be connected to an external air source.

Additional Garment Options AO

Imprinted

available.

Addition of 1 or 2 pockets available

1 or 2 pockets can be sealed onto many of our garments. Standard pockets come with drain holes in the bottom. Current pocket sizes offered are: 5" x 6" (no drain holes), 5" x 9", 7" x 7" and 10" x 10". The pocket will be manufactured from the same fabric as the garment. More Photos 3

+/- 3" increments to sleeve length available

The design of our garments allows for non-binding movements such as reaching, bending, stooping, sitting, squatting etc. for the typical height and stature per size. For taller or shorter users we will customize the standard garment, sleeve or leg length plus or minus in 3" increments to allow a custom fit. Contact our Customer Service Department for more information.

Addition of hang-up loops

A heavy duty ring attached to the garment for easy storage. This ring is NOT to be used as a rescue-ring.

Retrieval D-Ring Available SS

A Retrieval D-Ring can be added at an additional fee to any TEG. FACTORY INSTALLATION ONLY

Special Attributes

Includes special attributes. See Item View for specifics.

Fabric

CPE

Chlorinated Polyethylene is easily recognized by its bright orange color so that it is readily identifiable in hazardous conditions. CPE is a 23 mil thick proprietary formulated fabric that provides outstanding chemical and flame resistance while maintaining flexibility in low temperatures. It also provides superior protection from inorganic acids, oxidizing acids and aliphatic hydro-carbons. CPE fabric meets and exceeds the Flame Impingement criteria set forth in ASTM F1358.

GraLite® 20

GraLite® 20 is recommended for more severe corrosive and abrasive conditions because of its 24 mils to 26 mils thickness. With a PVC coating on one side, GraLite® 20 has proven itself to be a rugged, durable protective fabric.

WinterGlo 20

WinterGlo® 20 is 24 mils to 26 mils thick and offers outstanding chemical resistance. WinterGlo 20 is easily identified by its one side coating and our proprietary PVC formulation keeps fabric soft and flexible year round.