Standard Glove Change on All PVC Garments. Read More
REUSABLE CHEMICAL GEAR

Coveralls

The chemical-resistant coverall protects the wearer from the neck to the ankle. A one-piece front panel with a zipper (standard or pressure-sealing) opening at the side provides the best frontal protection against chemical splashes. Coveralls are also available with a center-opening front panel. Many other options are available to customize the Coverall to best suit your needs. Coverall designs are manufactured to order. Video demonstrations on the installation and removal of the SealTite® Sleeve Insert and Gloves are available in the SUPPORT link on our website.

 

Get a Quote
FEATURED PRODUCTS
073-7054-****
Coverall in GraLite® 20 Side Pressure Sealing Zipper SealTite® Sleeves Reinforcements Attached Stocking Foot Booties
073-6771-****
Coverall in GraLite® 20 Side Zipper SealTite® Sleeves
073-6974-****
Coverall in HiGlo Side Pressure Sealing Zipper SealTite® Sleeves Reinforcements Attached Boots

Existing Designs

Choices include only the options in use on an existing design. Scroll down to see all available options.

Filter By:

Click on box in left column and then on the Compare Products at bottom of chart to view side-by-side comparison of selected products. Limit of 3 at one time.

Showing 1 to 10 of 20 entries
Description
073-7056-****
GraLite® Side pressure-sealing zipper closure Snap flap SealTite® sleeves with choice of offered gloves Attached PVC stocking foot booties Reinforced elbows and knees
View
073-3077-****
GraLite® Side zipper closure Standard sleeves Standard leg cuff
View
073-6988-****
GraLite® Side zipper closure Standard sleeves Standard leg cuff Parka hood
View
073-7054-****
GraLite® 20 Side pressure-sealing zipper closure Snap flap SealTite® sleeves with choice of offered gloves Atttached PVC stocking foot booties Reinforced elbows and knees
View
073-7047-****
GraLite® 20 Side zipper closure Hook & loop flap SealTite® sleeves with choice of offered gloves Standard leg cuff Parka hood
View
073-6771-****
GraLite® 20 Side zipper closure Hook & loop flap SealTite® sleeves with choice of offered gloves Standard leg cuff
View
073-7048-****
HiGlo Center pressure-sealing zipper closure Snap flap SealTite® sleeves with choice of offered gloves Parka hood Attached PVC stocking foot booties
View
073-6135-****
HiGlo Center zipper closure Hook & loop flap SealTite® sleeves with choice of offered gloves Standard leg cuff Parka hood
View
073-6974-****
HiGlo Side pressure-sealing zipper closure Snap flap SealTite® sleeves with choice of offered gloves Attached Hazmax® steel-toe boots Reinforced elbows and knees
View
073-6970-****
HiGlo Side pressure-sealing zipper closure Snap flap SealTite® sleeves with choice of offered gloves Attached PVC stocking foot booties Reinforced elbows and knees
View
Description

Any asterisk (*) shown in an Item No. will be replaced with a combination of digits identifying all of the options selected.

Available Options

Download Options Chart
Select attribute from list to see available options. Select option photo to enlarge.
SS - Sold SeparatelyAO - Option available at time of order

Closure

Side Zip

Side closure construction is specifically designed to protect from direct frontal splashes. The one-piece body panel is fastened by an offset side fabric zipper covered by a 1 1/2" flap.

Side Pressure-sealing Zip

Side closure construction is specifically designed to protect from direct frontal splashes. The one-piece body panel is fastened by an offset side zipper covered by a 1 1/2" flap. This zipper is liquid and vapor tight.

Center Zip - Snap Flap

A standard zipper installed on the front of the Coveralls from neck to below the waist with a flap covering the zipper that has snaps added for additional splash protection.

Center Zip - Hook & Loop Flap

A standard zipper installed on the front of the Coveralls from neck to below the waist with a flap covering the zipper that has hook & loop added for additional splash protection.

Center Pressure-sealing Zip -Snap Flap

A liquid and vapor tight zipper closure down the center of the front of the Coveralls from the neck to below the waist that has snaps added to the flap that covers the zipper.

Center Pressure-sealing Zip -Hook & Loop Flap

A liquid and vapor tight zipper closure down the center of the front of the Coveralls from the neck to below the waist that has hook & loop added to the flap that covers the zipper.

Added Flap

Hook & Loop Flap

A hook & loop flap added over the side zip or side pressure-sealing zip closure of the garment to provide an additional splash barrier.

Snap Flap

A snap flap added over the side zip or side pressure-sealing zip closure of the garment to provide an additional splash barrier.

Hood Options

No Parka Hood

This design has the standard collar without the addition of a parka-style hood.

Parka Hood

The parka hood is designed to fit over a hard cap and has a drawstring to cinch the hood around the face piece and includes a hook & loop flap at the neck

Parka Hood Elastic Around the Face

The parka hood is designed to fit over a hard cap and has elastic sewn around the face to cinch the hood around the face piece and includes a hook & loop flap at the neck

Sleeves

Attached Glove Sleeve with Choice of Offered Gloves

The gloves we offer with our specific fabrics can be permanently attached/sealed to the end of the sleeves. These gloves cannot be replaced if damaged as they can with the SealTite® system.

Double Sleeve with Elastic Gathered Inner Cuff

An additional arm section has been sealed onto the forearm of the sleeve and extends to the end of the sleeve. Elastic is added to the inner sleeve cuff to gather it close to the wrists. A glove can be worn between the two sleeve components for additional splash protection.

Double Sleeve with Elastic Gathered Inner Cuff and Hook & Loop Outer Cuff

An additional arm section has been sealed onto the forearm of the sleeve and extends to the end of the sleeve. Elastic is added to the inner sleeve cuff to gather it close to the wrists . The outer cuff can be secured snugly over the glove with the added hook & loop strip. The glove can be worn between the two sleeve components for additional splash protection.

Double Sleeve with Elastic Gathered Inner Cuff and Snap Outer Cuff

An additional arm section has been sealed onto the forearm of the sleeve and extends to the end of the sleeve. Elastic is added to the inner sleeve cuff to gather it close to the wrists . The outer cuff can be secured snugly over the glove with the added snaps. The glove can be worn between the two sleeve components for additional splash protection.

Elastic Cuff Sleeve

The sleeve has an elastic-gathered cuff which cinches the sleeve closer around the wrist to add some splash protection.

SealTite® Sleeve with Choice of Offered Gloves

The SealTite® sleeve provides a liquid-tight, vapor-tight seal when worn with one of our beaded gloves for optimum protection from splashes on the wearer's forearm. See About Us link for more information about the SealTite® sleeve.

Standard Sleeve

The standard sleeve cuff provides reliable, economical arm protection.

Gloves AO

Blue Kevlar®-Lined Triple-Dipped PVC

Triple-dipped PVC-coated glove with a textured layer covering the hand portion of the glove to about the wrist and having a liner made with Kevlar® to provide cut resistance as well as chemical protection. This glove has ANSI Level 3 cut protection.

Black Neoprene

Per the glove manufacturer: “Broad chemical resistance (acids, aliphatic solvents, solvent mixtures), increased by the thickness of the material. Good grip, due to embossed texture. Easy to pull on and off, due to chlorinated interior. The two neoprene layers superimposed increase the mechanical and chemical resistance. The glove red inner lay ensures that any wear is clearly visible"

Blue/Black Neoprene

Mapa Professional states that this glove has “Excellent chemical resistance with enhanced rough grip. Durable Neoprene with an inner layer in palm area of Natural Rubber for excellent dexterity, mechanical and chemical protection.”.

Heavy Duty Black Neoprene

According to the glove manufacturer – this glove has “superior chemical resistance against acids and alkalis, such as concentrated hydrofluoric acid, oils, and greases” It also offers some insulation from hot liquids due to the cotton lining.

View Gloves & Sleeves category for specialty glove availability

In addition to the gloves we sell with the garment, we offer specialty gloves available in case quantities.

Alternate Legs

Double leg cuff with elastic inner cuffs

An additional leg section has been sealed onto the calf of the leg and extends to the bottom of the leg to pull over the boot for drip protection. Elastic is added to the inner leg cuff to gather it close to the ankle and stirrups are attached to the inner leg section to hold the leg securely inside the boots.

Flared leg cuff with snaps

The leg section from the knee to the cuff is slightly flared and has snaps added. This allows for an easier donning over boots and the snugging the leg cuff to the boot with the snap closure.

Attached Footwear

Attached Molded Black PVC Boots

Molded PVC Boots are made of chemically resistant molded PVC with 3/16" thick soles for protection from corrosive chemicals that have been permanently attached/sealed to the end of the leg. These boots are designed to fit over shoes or light work boots. The seal is liquid and vapor tight.

Attached PVC Composite-Safety-Toe Boots

PVC boot with a Composite safety-toe that meets ASTM F2413 M/I/75/C/75 EH*. This boot is 100% waterproof, does not transfer cold or set off metal detectors. The outsole provides slip resistance as well as has a chemical resistance to fats, oils, certain acids, alkalies, petroleum hydrocarbons, and other chemicals.

Attached Hazmax® Over-the-shoe Boots

Over-the-shoe Hazmax® boot fits over most shoes and boots and provides excellent chemical resistance. It has a seamless one-piece injection mold construction from a high viscosity flexible PVC that has been permanently attached/sealed to the end of the leg. This seal is liquid and vapor tight.

Attached Hazmax® Steel-toe Boots

Green Hazmax® boot with a steel toe that complies with ASTM F2413-05 and CSA Z195 and a steel shank and midsole. that has been permanently attached/sealed to the end of the leg. The one-piece PVC boot construction makes this a suitable boot for use in environments involving chemicals The seal is liquid and vapor tight

Attached PVC Stocking Foot Booties

PVC stocking Foot Booties are molded and permanently attached to the leg cuff. This bootie is seamless, comfortable and shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

Attached CPE Stocking Foot Booties

CPE stocking Foot Booties are sewn and permanently attached to the leg cuff. This bootie is comfortable and shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

Poly Cord in Collar

The standard collar has an integrated welting bead along the edge for added strength.  If being used in extreme cold, the standard bead can be replaced with a poly cord.

Reinforced Elbows

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Reinforced Crotch

An extra triangular patch of garment fabric is sewn and sealed in the crotch region for added strength.

Reinforced Knees

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Reinforced Seat

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Additional Options AO

Imprinted

See Imprinting Garments Category for more information on imprinting available

Addition of 1 or 2 pockets

1 or 2 pockets can be sealed onto many of our garments. Standard pockets come with drain holes in the bottom. Current pocket sizes offered are: 5" x 6" (no drain holes), 5" x 9", 7" x 7" and 10" x 10". The pocket will be manufactured from the same fabric as the garment. More Photos 3

+/- 3" increments to sleeve length

The design of our garments allows for non-binding movements such as reaching, bending, stooping, sitting, squatting etc. for the typical height and stature per size. For taller or shorter users we will customize the standard garment, sleeve or leg length plus or minus in 3" increments to allow a custom fit. Contact our Customer Service Department for more information.

+/- 3" increments to leg length

The design of our garments allows for non-binding movements such as reaching, bending, stooping, sitting, squatting etc. for the typical height and stature per size. For taller or shorter users we will customize the standard garment, sleeve or leg length plus or minus in 3" increments to allow a custom fit. Contact our Customer Service Department for more information.

Nomex®-lined

Click on Nomex®-lined Garments in the left menu to view Nomex®-lined Coveralls.

Fabric

HiGlo

HiGlo is a bright yellow, proprietary polyvinyl chloride compound that is coated on both sides. Our compound gives the fabric a softer, more pliant feel and superb low temperature flexibility. At 19 mils to 21 mils thick, HiGlo is the fabric of choice for maintenance and operations personnel within the chemical/petrochemical and HF Refining industries.

CPE

Chlorinated Polyethylene is easily recognized by its bright orange color so that it is readily identifiable in hazardous conditions. CPE is a 23 mil thick proprietary formulated fabric that provides outstanding chemical and flame resistance while maintaining flexibility in low temperatures. It also provides superior protection from inorganic acids, oxidizing acids and aliphatic hydro-carbons. CPE fabric meets and exceeds the Flame Impingement criteria set forth in ASTM F1358.

GraLite®

GraLite® is a pearl gray, proprietary polyvinyl chloride compound that is coated on both sides. The 19 mils to 21 mils thick material offers resistance to most aliphatic hydrocarbons, caustics, organic acids and alcohols.

FlexLite Orange

FlexLite Orange is easily recognized by its bright neon orange color. At 19 mils to 21 mils thick, FlexLite Orange is similar to HiGlo except for its difference in color.

GraLite® 20

GraLite® 20 is recommended for more severe corrosive and abrasive conditions because of its 24 mils to 26 mils thickness. With a PVC coating on one side, GraLite® 20 has proven itself to be a rugged, durable protective fabric.

WinterGlo

WinterGlo is a bright pink and coated on both sides. WinterGlo is 19 mils to 21 mils thick and easily identified by its distinctive color and flexibility.

WinterGlo 20

WinterGlo® 20 is 24 mils to 26 mils thick and offers outstanding chemical resistance. WinterGlo 20 is easily identified by its one side coating and our proprietary PVC formulation keeps fabric soft and flexible year round.