Standard Glove Change on All PVC Garments. Read More

WorkMaster®

The StaSafe® WorkMaster®, available with front or rear zipper entry, is a Level A protective suit with a streamlined design. It provides ample room in the shoulders, allowing the wearer to easily remove their arms from the sleeves. The WorkMaster® eliminates the need for a 30 or 60 minute SCBA; it causes less fatigue during long hours of use. Available with numerous pass-throughs options. All WorkMaster® suits come with an All-Purpose Hood, which offers an extra large window providing unhampered head movement and include a 40 mil cover window. WorkMaster® suits come with SealTite® glove assembly. This assembly provides a liquid-tight, vapor-tight seal when worn with one of our beaded gloves that offers optimum protection. A rigid plastic insert is fitted inside the glove gauntlet and tapered sleeve cuff. The side pouch is standard on all WorkMaster® garments and accommodates numerous egress bottles. Various boot configurations are available on the WorkMaster®. Other options include, vent system, AC, or reinforcing patches at the knee, elbow or crotch. Every WorkMaster® must comply with the ASTM1052 inflation testing standard to ensure its air-tight integrity before leaving the factory. WorkMaster® suits are manufactured to order. Video demonstrations on the installation and removal of the SealTite® Sleeve Insert and Gloves are available in the SUPPORT link on our website.
FEATURED PRODUCTS
076-6961-****
Front Entry WorkMaster® in CPE Attached Stocking Foot Booties AC & Vent Reinforcements
076-7171-****
Front Entry WorkMaster® in CPE Attached Stocking Foot Booties AC & Vent Reinforcements
076-7091-****
Front Entry WorkMaster® in CPE Attached Stocking Foot Booties Vent
076-7172-****
Front Entry WorkMaster® in CPE Attached Stocking Foot Booties Vent Reinforcements
076-7161-****
Front Entry WorkMaster® Slim in GL20 Attached Stocking Foot Booties AC & Vent
076-6471-****
Rear Entry WorkMaster® in GraLite® 20 Attached Molded Black PVC Boots
076-7098-****
Front Entry WorkMaster® Slim in WinterGlo 20 Attached Stocking Foot Booties Vent

Existing Designs

Choices include only the options in use on an existing design. Scroll down to see all available options.

Filter By:

Click on box in left column and then on the Compare Products at bottom of chart to view side-by-side comparison of selected products. Limit of 3 at one time.

Description Entry-WorkMaster Attached Footwear-WorkMaster AC-Vent-WorkMaster
076-6612-****
CPE Front entry WorkMaster® Attached Hazmax® steel-toe boots Choice of offered gloves 40 mil cover window An air pass-through, sold separately, is required and must be added at time of...
Front Entry Attached Hazmax® Steel-toe Boots View
076-7030-****
CPE Front entry WorkMaster® Attached Hazmax® steel-toe boots Choice of offered gloves 40 mil cover window INCLUDES a Vent system with choice of offered fittings An air pass-through, s...
Front Entry Attached Hazmax® Steel-toe Boots Vent View
076-6526-****
CPE Front entry WorkMaster® Attached stocking foot booties Choice of offered gloves  Option to add offered boots 40 mil cover window An air pass-through, sold separately, is required...
Front Entry Attached CPE Stocking Foot Booties View
076-6584-****
CPE Front entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES AC unit  An air pass-through, sold ...
Front Entry Attached CPE Stocking Foot Booties AC Unit View
076-6961-****
CPE Front entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES AC unit & Vent system and a choice of o...
Front Entry Attached CPE Stocking Foot Booties AC Unit & Vent View
076-7171-****
CPE Front entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES AC unit & Vent system and a choice...
Front Entry Attached CPE Stocking Foot Booties AC Unit & Vent View
076-7088-****
CPE Front entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES Reinforced elbows and knees An air ...
Front Entry Attached CPE Stocking Foot Booties View
076-7091-****
CPE Front Entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES Vent system with choice of offered fittings Sco...
Front Entry Attached CPE Stocking Foot Booties Vent View
076-7064-****
CPE Front entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES Vent system with choice of offered fittings...
Front Entry Attached CPE Stocking Foot Booties Vent View
076-7172-****
CPE Front entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES Vent system and a choice of offered fitting...
Front Entry Attached CPE Stocking Foot Booties Vent View
076-7161-****
GL20 Front entry WorkMaster® Slim Design Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES AC unit & Vent syste...
Front Entry Attached PVC Stocking Foot Booties AC Unit & Vent View
076-6579-****
GL 20 Front entry WorkMaster® Attached molded black PVC boots Choice of offered gloves 40 mil cover window An air pass-through, sold separately, is required and must be added at time of or...
Front Entry Attached Molded Black PVC Boots View
076-7080-****
GL 20 Front Entry WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES Vent sytem 2' air hose with a Hanse...
Front Entry Attached PVC Stocking Foot Booties Vent View
076-7108-****
GL 20 Rear entry WorkMaster® Attached molded black PVC boots Choice of offered gloves 40 mil cover window INCLUDES a vent system with a choice of offered fittings An air pass-through, sol...
Rear Entry Attached Molded Black PVC Boots Vent View
076-6471-****
GL 20 Rear entry WorkMaster® Attached molded black PVC boots Choice of offered gloves 40 mil cover window An air pass-through, sold separately, is required and must be added at time of ord...
Rear Entry Attached Molded Black PVC Boots View
076-7098-****
WG 20 Front Entry Slim Design WorkMaster® Attached stocking foot booties Choice of offered gloves Option to add offered boots 40 mil cover window INCLUDES a vent with choice of of...
Front Entry Attached PVC Stocking Foot Booties Vent View
Description Entry-WorkMaster Attached Footwear-WorkMaster AC-Vent-WorkMaster

Any asterisk (*) shown in an Item No. will be replaced with a combination of digits identifying all of the options selected.

Available Options

Select attribute from list to see available options. Select option photo to enlarge.
SS - Sold SeparatelyAO - Option available at time of order

Entry-WorkMaster

Front Entry

A pressure-sealing zipper with a flap covering the zipper extending from the shoulder crossing the body to the opposite side knee area for ease of donning and doffing.

Rear Entry

A pressure-sealing zipper extending from the crown nearly to the crotch area for ease of donning and doffing.

Gloves for CPE Fabric AO

Black Neoprene

Per the glove manufacturer: “Broad chemical resistance (acids, aliphatic solvents, solvent mixtures), increased by the thickness of the material. Good grip, due to embossed texture. Easy to pull on and off, due to chlorinated interior. The two neoprene layers superimposed increase the mechanical and chemical resistance. The glove red inner lay ensures that any wear is clearly visible"

Heavy Duty Black Neoprene

According to the glove manufacturer – this glove has “superior chemical resistance against acids and alkalis, such as concentrated hydrofluoric acid, oils, and greases” It also offers some insulation from hot liquids due to the cotton lining.

View Gloves & Sleeves category for specialty glove availability

In addition to the gloves we sell with the garment, we offer specialty gloves available in case quantities.

Gloves for PVC Fabrics AO

Blue Kevlar®-lined Triple-Dipped PVC

Triple-dipped PVC-coated glove with a textured layer covering the hand portion of the glove to about the wrist and having a liner made with Kevlar® to provide cut resistance as well as chemical protection. This glove has ANSI Level 3 cut protection.

Heavy Duty Black Neoprene

According to the glove manufacturer – this glove has “superior chemical resistance against acids and alkalis, such as concentrated hydrofluoric acid, oils, and greases” It also offers some insulation from hot liquids due to the cotton lining.

View Gloves & Sleeves category for specialty glove availability

In addition to the gloves we sell with the garment, we offer specialty gloves available in case quantities.

Attached Footwear-WorkMaster

Attached PVC Composite-safety-toe Boots

PVC boot with a Composite safety-toe that meets ASTM F2413 M/I/75/C/75 EH*. This boot is 100% waterproof, does not transfer cold or set off metal detectors. The outsole provides slip resistance as well as has a chemical resistance to fats, oils, certain acids, alkalies, petroleum hydrocarbons, and other chemicals.

Attached Hazmax® Over-the-shoe Boots

Over-the-shoe Hazmax® boot fits over most shoes and boots and provides excellent chemical resistance. It has a seamless one-piece injection mold construction from a high viscosity flexible PVC that has been permanently attached/sealed to the end of the leg. This seal is liquid and vapor tight.

Attached Hazmax® Steel-toe Boots

Green Hazmax® boot with a steel toe that complies with ASTM F2413-05 and CSA Z195 and a steel shank and midsole. that has been permanently attached/sealed to the end of the leg. The one-piece PVC boot construction makes this a suitable boot for use in environments involving chemicals The seal is liquid and vapor tight.

Attached Molded Black PVC Boots

Molded PVC Boots are made of chemically resistant molded PVC with 3/16" thick soles for protection from corrosive chemicals that have been permanently attached/sealed to the end of the leg. These boots are designed to fit over shoes or light work boots. The seal is liquid and vapor tight.

Attached PVC Stocking Foot Booties

PVC Stocking Foot Booties are molded and permanently attached to the leg cuff. This bootie is seamless, comfortable and shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

Attached CPE Stocking Foot Booties

CPE Stocking Foot Booties are molded permanently attached to the leg cuff. This bootie is shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

Boots Available with Stocking Foot Booties-WorkMaster AO

Hazmax® Steel-toe Boots

16" Green boot with a steel toe that complies with ASTM F2413-05 and CSA Z195 and a steel shank and midsole. The one-piece PVC construction makes this a suitable boot for use in environments involving chemicals.

PVC Composite-safety-toe Boots

15" PVC boot with a Composite safety-toe that meets ASTM F2413 M/I/75/C/75 EH*. This boot is 100% waterproof, does not transfer cold or set off metal detectors. The outsole provides slip resistance as well as has a chemical resistance to fats, oils, certain acids, alkalies, petroleum hydrocarbons, and other chemicals. *Boot offers some electrical hazard protection. Contact Customer Service for specific electrical hazard protection information.

Cover Window-WorkMaster

40 mil thick field replaceable cover window to protect the sealed window from scratches, nicks and/or other minor damage. Flaps are added around the TEG window. The bottom flap has drain holes in the bottom and an extra splash flap. The cover window fits inside the window frame flaps surrounding the sealed window.

Cover Window Replacement-WorkMaster SS AO

807-8006-0050 - 40 mil Cover Window

40 mil thick field replaceable cover window to protect the sealed window from scratches, nicks and/or other minor damage. Flaps are added around the TEG window. The bottom flap has drain holes in the bottom and an extra splash flap. The cover window fits inside the window frame flaps surrounding the sealed window.

AC-Vent-WorkMaster

AC Unit

Adding an air-conditioning unit helps to keep the environment inside the garment comfortable. We offer a variety of AC units in cool only or cool/warm. Contact our Customer Service to determine which units are available with this suit.

Vent

A vent is added to improve the comfort level of interior suit environment while in use. Two additional hoses are attached to the open ports to add ventilation air to the legs.

AC Unit & Vent

Adding an air-conditioning unit and a vent system helps to keep the environment inside the garment comfortable and air circulating. We offer a variety of AC units in cool only or cool/warm. Contact our Customer Service to determine which units are available with this suit.

Fitting for Vent AO

Brass Snap-Tite® Fitting

The fitting provided with the garment for connecting to the air source.

Hansen Fitting

The fitting provided with the garment for connecting to the air source.

Schrader Fitting

The fitting provided with the garment for connecting to the air source.

Snap-Tite® Fitting

The fitting provided with the garment for connecting to the air source.

Tru-Flate® Fitting

The fitting provided with the garment for connecting to the air source.

Pass-through Available SS

NIOSH approved garment pass-through can be added for an additional fee. FACTORY INSTALLATION ONLY

Customer-supplied Pass-through Installation Available

We will install customer-supplied pass-through device other than Scott for an additional fee.

Reinforced Elbows-WorkMaster

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Reinforced Knees-WorkMaster

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Reinforced Crotch-WorkMaster

An extra triangular patch of garment fabric is sewn and sealed in the crotch region for added strength.

Reinforced Seat-WorkMaster

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

Additional Garment Options AO

Imprinted

See Imprinting Garments Category for more information on imprinting available.

Addition of 1 or 2 pockets available

1 or 2 pockets can be sealed onto many of our garments. Standard pockets come with drain holes in the bottom. Current pocket sizes offered are: 5" x 6" (no drain holes), 5" x 9", 7" x 7" and 10" x 10". The pocket will be manufactured from the same fabric as the garment. More Photos 3

+/- 3" increments to sleeve length available

The design of our garments allows for non-binding movements such as reaching, bending, stooping, sitting, squatting etc. for the typical height and stature per size. For taller or shorter users we will customize the standard garment, sleeve or leg length plus or minus in 3" increments to allow a custom fit. Contact our Customer Service Department for more information.

Addition of hang-up loops

A heavy duty ring attached to the garment for easy storage. This ring is NOT to be used as a rescue-ring.

Retrieval D-Ring Available SS

A Retrieval D-Ring can be added at an additional fee to any TEG. FACTORY INSTALLATION ONLY

Fabric

CPE

Chlorinated Polyethylene is easily recognized by its bright orange color so that it is readily identifiable in hazardous conditions. CPE is a 23 mil thick proprietary formulated fabric that provides outstanding chemical and flame resistance while maintaining flexibility in low temperatures. It also provides superior protection from inorganic acids, oxidizing acids and aliphatic hydro-carbons. CPE fabric meets and exceeds the Flame Impingement criteria set forth in ASTM F1358.

GraLite® 20

GraLite® 20 is recommended for more severe corrosive and abrasive conditions because of its 24 mils to 26 mils thickness. With a PVC coating on one side, GraLite® 20 has proven itself to be a rugged, durable protective fabric.

WinterGlo 20

WinterGlo® 20 is 24 mils to 26 mils thick and offers outstanding chemical resistance. WinterGlo 20 is easily identified by its one side coating and our proprietary PVC formulation keeps fabric soft and flexible year round.